Build.prop TWEAKS for every PHONE

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Build.prop TWEAKS for every PHONE

      Hello to All this is my first thread here on ECHOE forum so this tweaks maybe its working for u & maybe not so just adding what u want from this tweaks to ur system/build.prop at the end of ur build.prop then reboot to ur custom recovery & wipe cache/dalvick then give it few hours/days & u will see the difference lol so enjoy my friends i hope its helping u lol


      Source Code

      1. # Rendering Tweaks
      2. debug.composition.type=c2d
      3. debug.egl.hw=1
      4. debug.enabletr=true
      5. debug.overlayui.enable=1
      6. debug.qctwa.preservebuf=1
      7. debug.performance.tuning=1
      8. debug.sf.hw=1
      9. dev.pm.dyn_samplingrate=1
      10. hw3d.force=1
      11. ro.config.disable.hw_accel=false
      12. ro.fb.mode=1
      13. ro.sf.compbypass.enable=0
      14. ro.vold.umsdirtyratio=20
      15. persist.sys.composition.type=c2d
      16. persist.sys.ui.hw=1
      17. video.accelerate.hw=1
      18. ro.camera.sound.forced=0
      19. # Default Network Mode
      20. ro.telephony.default_network=10
      21. # Enable GPU Acceleration
      22. video.accelerate.hw=1
      23. debug.performance.tuning=1
      24. persist.sys.composition.type=gpu
      25. debug.qc.hardware=true
      26. debug.qctwa.statusbar=1
      27. debug.egl.profiler=1
      28. debug.egl.hw=1
      29. debug.composition.type=gpu
      30. hw3d.force=1
      31. ro.product.gpu.driver=1
      32. persist.sys.use_16bpp_alpha=1
      33. persist.sampling_profiler=0
      34. hwui.render_dirty_regions=false
      35. hwui.disable_vsync=true
      36. # Saves some battery without reducing performances
      37. wifi.supplicant_scan_interval=497
      38. pm.sleep_mode=2
      39. power.saving.mode=1
      40. ro.vold.umsdirtyratio=20
      41. proximity_incall=enable
      42. ro.config.hw_quickpoweron=true
      43. usb_wakeup=enable
      44. ro.config.hw_power_saving=true
      45. # Battery save
      46. ro.ril.disable.power.collapse=0
      47. profiler.force_disable_err_rpt=1
      48. profiler.force_disable_ulog=1
      49. dalvik.vm.checkjni=false
      50. dalvik.vm.execution-mode=int:jit
      51. ro.ril.power_collapse=1
      52. power_supply.wakeup=enable
      53. ro.mot.eri.losalert.delay=1000
      54. ro.config.hw_fast_dormancy=1
      55. ro.config.hw_power_saving=1
      56. # Misc Tweaks (enables ADB service)
      57. persist.service.adb.enable=1
      58. # Sensor Sleep Control
      59. ro.ril.sensor.sleep.control=1
      60. # Device will boot faster
      61. persist.sys.shutdown.mode=hibernate
      62. ro.config.hw_fast_dormancy=1
      63. ro.config.hw_quickpoweron=true
      64. ro.securestorage.support=false
      65. # Reduce dial-out time
      66. ro.telephony.call_ring.delay=0
      67. # Allow purge of assets to free more ram
      68. persist.sys.purgeable_assets=1
      69. # More free ram and apps load faster
      70. dalvik.vm.dexopt-flags=m=y
      71. # More RAM
      72. #persist.sys.purgeable_assets=1
      73. persist.service.pcsync.enable=0
      74. persist.service.lgospd.enable=0
      75. ro.config.low_ram.mod=true
      76. # Qualcomm Tuned
      77. debug.qctwa.statusbar=1
      78. debug.qctwa.preservebuf=1
      79. debug.qc.hardware=true
      80. com.qc.hardware=true
      81. ro.max.fling_velocity=12000
      82. ro.min.fling_velocity=8000
      83. # Increase general Performance
      84. debug.performance.tuning=1
      85. # Increase some Performance
      86. ro.secure=0
      87. persist.sys.use_16bpp_alpha=1
      88. ro.product.gpu.driver=1
      89. ro.min.fling_velocity=8000
      90. debug.gr.swapinterval=1
      91. debug.kill_allocating_task=0
      92. ENFORCE_PROCESS_LIMIT=false
      93. hw3d.force=1
      94. persist.sys.NV_FPSLIMIT=60
      95. ro.debuggable=1
      96. ro.min_pointer_dur=8
      97. ro.min_pointer_dur=1
      98. ro.wmt.blcr.enable=0
      99. # Better Telephony Settings
      100. ro.config.vc_call_vol_steps=20
      101. ring.delay=0
      102. ro.lge.proximity.delay=25
      103. mot.proximity.delay=25
      104. ro.mot.buttonlight.timeout=0
      105. # TOUCH
      106. touch.presure.scale=0.001
      107. # Better Scrolling responsiveness and speed
      108. windowsmgr.max_events_per_sec=340
      109. ro.max.fling_velocity=12000
      110. ro.min.fling_velocity=8000
      111. ro.min_pointer_dur=8
      112. # Smoothens UI
      113. persist.service.lgospd.enable=0
      114. persist.service.pcsync.enable=0
      115. ro.ril.enable.a52=1
      116. ro.ril.enable.a53=0
      117. # Increase camera's photo and video recording quality
      118. ro.media.dec.jpeg.memcap=8000000
      119. ro.media.enc.hprof.vid.bps=8000000
      120. ro.media.enc.hprof.vid.fps=65
      121. ro.media.dec.aud.wma.enabled=1
      122. ro.media.dec.vid.wmv.enabled=1
      123. # Better Flashlight intensity and camera-flash quality
      124. ro.media.capture.flash=led
      125. ro.media.capture.flashMinV=3300000
      126. ro.media.capture.torchIntensity=40
      127. ro.media.capture.flashIntensity=70
      128. ro.media.capture.maxres=16m
      129. ro.media.capture.fast.fps=4
      130. ro.media.capture.slow.fps=120
      131. ro.media.panorama.defres=3264x1840
      132. ro.media.panorama.frameres=1280x720
      133. ro.camcorder.videoModes=true
      134. ro.media.cam.preview.fps=0
      135. ro.media.codec_priority_for_thumb=so
      136. # Better call voice quality.
      137. ro.ril.enable.amr.wideband=1
      138. # Force launcher into memory
      139. ro.HOME_APP_ADJ=1
      140. # Disable Bytecode Verification
      141. dalvik.vm.verify-bytecode=false
      142. dalvik.vm.dexopt-flags=m=y,v=n,o=v
      143. dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
      144. # Improves Camera & Video Results
      145. ro.media.panorama.defres=3264x1840
      146. ro.media.panorama.frameres=1280x720
      147. ro.camcorder.videoModes=true
      148. ime_extend_row_keyboard=true
      149. ime_onehand_keyboard=true
      150. ime_split_keyboard=true
      151. ime_vibration_pattern=0:60
      152. # Hardware 2D & 3D Rendering
      153. hw3d.force=1
      154. hw2d.force=1
      155. # 3d performance
      156. persist.android.strictmode=0
      157. ro.secure=0
      158. # Audio Tweaks
      159. persist.audio.fluence.mode=endfire
      160. persist.audio.hp=true
      161. persist.audio.vr.enable=false
      162. persist.audio.handset.mic=digital
      163. persist.audio.lowlatency.rec=false
      164. # System prop to select audio resampler quality
      165. af.resampler.quality=255
      166. # System prop to select MPQAudioPlayer by default on mpq8064
      167. mpq.audio.decode=true
      168. # Increase jpg quality to 100%
      169. ro.media.enc.jpeg.quality=100
      170. # Disable Error reporting and logs
      171. profiler.force_disable_err_rpt=1
      172. profiler.force_disable_ulog=1
      173. # Disable Sending Usage Data
      174. ro.config.nocheckin=1
      175. # Fix some application issues (FC)
      176. ro.kernel.android.checkjni=0
      177. # MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
      178. ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
      179. # Miscellaneous Tweaks for performance
      180. ro.config.hw_menu_unlockscreen=false
      181. dalvik.vm.dexopt-flags=m=y
      182. ro.mot.eri.losalert.delay=1000
      183. ro.telephony.sms_segment_size=160
      184. # Better internet browsing & download speed
      185. net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
      186. net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
      187. net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
      188. net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
      189. # Smoother video streaming and tweak media
      190. media.stagefright.enable-player=true
      191. media.stagefright.enable-meta=true
      192. media.stagefright.enable-scan=true
      193. media.stagefright.enable-http=true
      194. media.stagefright.enable-aac=true
      195. media.stagefright.enable-qcp=true
      196. media.stagefright.enable-record=false
      197. # 3G signal and speed tweaks
      198. ro.ril.hsxpa=3
      199. ro.ril.gprsclass=10
      200. ro.ril.hep=1
      201. ro.ril.enable.dtm=1
      202. ro.ril.hsdpa.category=12
      203. ro.ril.enable.a53=1
      204. ro.ril.enable.3g.prefix=1
      205. ro.ril.htcmaskw1.bitmask=4294967295
      206. ro.ril.htcmaskw1=14449
      207. ro.ril.hsupa.category=7
      208. ro.ril.hsdpa.category=10
      209. ro.ril.enable.a52=1
      210. ro.ril.set.mtu1472=1
      211. persist.cust.tel.eons=1
      212. ro.config.hw_fast_dormancy=1
      213. persist.data_netmgrd_mtu=1482
      214. persist.data_netmgrd_nint=8
      215. ro.use_data_netmgrd=true
      216. ro.ril.enable.dtm=1
      217. ro.ril.def.agps.mode=2
      218. ro.ril.def.agps.feature=1
      219. ro.ril.enable.gea3=1
      220. ro.ril.enable.fd.plmn.prefix=23402,23410,23411
      221. # Modify MTU from 1500 to 1472 on 3G network for speeding up
      222. ro.ril.set.mtu1472=1
      223. # For the default value of agps
      224. ro.ril.def.agps.mode=2
      225. ro.ril.def.agps.feature=1
      226. # GOOGLE DNS
      227. net.dns1=8.8.8.8
      228. net.dns2=8.8.4.4
      229. net.rmnet0.dns1=8.8.8.8
      230. net.rmnet0.dns2=8.8.4.4
      231. net.ppp0.dns1=8.8.8.8
      232. net.ppp0.dns2=8.8.4.4
      233. net.wlan0.dns1=8.8.8.8
      234. net.wlan0.dns2=8.8.4.4
      235. net.eth0.dns1=8.8.8.8
      236. net.eth0.dns2=8.8.4.4
      237. net.gprs.dns1=8.8.8.8
      238. net.gprs.dns2=8.8.4.4
      239. # CRT
      240. persist.sys.screen_off=crt
      241. persist.sys.screen_on=none
      242. # Support For IPV4 and IPV6
      243. persist.telephony.support.ipv6=1
      244. persist.telephony.support.ipv4=1
      245. #
      246. ro.com.google.locationfeatures=1
      247. ro.com.google.networklocation=1
      248. htc.audio.alt.enable=0
      249. htc.audio.hac.enable=0
      250. # Wireless Tweaks
      251. net.ipv4.ip_no_pmtu_disc=0
      252. net.ipv4.route.flush=1
      253. net.ipv4.tcp_ecn=0
      254. net.ipv4.tcp_fack=1
      255. net.ipv4.tcp_mem=187000 187000 187000
      256. net.ipv4.tcp_moderate_rcvbuf=1
      257. net.ipv4.tcp_no_metrics_save=1
      258. net.ipv4.tcp_rfc1337=1
      259. net.ipv4.tcp_rmem=4096 39000 187000
      260. net.ipv4.tcp_sack=1
      261. net.ipv4.tcp_timestamps=1
      262. net.ipv4.tcp_window_scaling=1
      263. net.ipv4.tcp_wmem=4096 39000 18700
      264. wifi.supplicant_scan_interval=180
      265. net.ipv4.tcp_window_scaling=1
      266. # Video Acceleration Enabled And HW debugging
      267. video.accelerate.hw=1
      268. debug.sf.hw=1
      269. debug.performance.tuning=1
      270. debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
      271. debug.egl.hw=1
      272. debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
      273. # Disable logcat
      274. logcat.live=disable
      275. # Better image quality, lower performance.
      276. persist.sys.use_dithering=1
      277. # For SD storage insert notification sound
      278. persist.service.mount.playsnd=0
      279. # faster youtube?
      280. ro.ril.hep=0
      281. # Unlock fps limit
      282. debug.egl.swapinterval=0
      283. qemu.hw.mainkeys=1
      284. # Enable egl profiler - enable harware egl profile
      285. debug.egl.profiler=1
      286. # Other Tweaks
      287. qemu.hw.mainkeys=1
      288. ro.config.hw_new_wifitopdp=1
      289. vm.dirty_ratio=90
      290. vm.dirty_background_ratio=70
      291. vm.vfs_cache_pressure=10
      292. vm.min_free_kbytes=4096
      293. ro.config.hw_new_wifitopdp=1
      294. dalvik.vm.dexopt-data-only=1
      295. dalvik.vm.heapstartsize=1m
      296. dalvik.vm.heapgrowthlimit=64m
      297. dalvik.vm.lockprof.threshold=250
      298. dalvik.vm.dexopt-flags=m=v,o=y
      299. dalvik.vm.jmiopts=forcecopy
      Display All

      Edit: just use the code taggs this will improve the readability for the mobile users thanks for sharing Acer4605
      Lol if u see some tweaking same just deleted the same lol i hope it will helping u lol

      HAPPY NEW YEAR From thereassaad to ALL
    • Re: Build.prop TWEAKS for every PHONE

      "thereassaad" wrote:

      Hello to All this is my first thread here on ECHOE forum so this tweaks maybe its working for u & maybe not so just adding what u want from this tweaks to ur system/build.prop at the end of ur build.prop then reboot to ur custom recovery & wipe cache/dalvick then give it few hours/days & u will see the difference lol so enjoy my friends i hope its helping u lol


      Source Code

      1. # Rendering Tweaks
      2. debug.composition.type=c2d
      3. debug.egl.hw=1
      4. debug.enabletr=true
      5. debug.overlayui.enable=1
      6. debug.qctwa.preservebuf=1
      7. debug.performance.tuning=1
      8. debug.sf.hw=1
      9. dev.pm.dyn_samplingrate=1
      10. hw3d.force=1
      11. ro.config.disable.hw_accel=false
      12. ro.fb.mode=1
      13. ro.sf.compbypass.enable=0
      14. ro.vold.umsdirtyratio=20
      15. persist.sys.composition.type=c2d
      16. persist.sys.ui.hw=1
      17. video.accelerate.hw=1
      18. ro.camera.sound.forced=0
      19. # Default Network Mode
      20. ro.telephony.default_network=10
      21. # Enable GPU Acceleration
      22. video.accelerate.hw=1
      23. debug.performance.tuning=1
      24. persist.sys.composition.type=gpu
      25. debug.qc.hardware=true
      26. debug.qctwa.statusbar=1
      27. debug.egl.profiler=1
      28. debug.egl.hw=1
      29. debug.composition.type=gpu
      30. hw3d.force=1
      31. ro.product.gpu.driver=1
      32. persist.sys.use_16bpp_alpha=1
      33. persist.sampling_profiler=0
      34. hwui.render_dirty_regions=false
      35. hwui.disable_vsync=true
      36. # Saves some battery without reducing performances
      37. wifi.supplicant_scan_interval=497
      38. pm.sleep_mode=2
      39. power.saving.mode=1
      40. ro.vold.umsdirtyratio=20
      41. proximity_incall=enable
      42. ro.config.hw_quickpoweron=true
      43. usb_wakeup=enable
      44. ro.config.hw_power_saving=true
      45. # Battery save
      46. ro.ril.disable.power.collapse=0
      47. profiler.force_disable_err_rpt=1
      48. profiler.force_disable_ulog=1
      49. dalvik.vm.checkjni=false
      50. dalvik.vm.execution-mode=int:jit
      51. ro.ril.power_collapse=1
      52. power_supply.wakeup=enable
      53. ro.mot.eri.losalert.delay=1000
      54. ro.config.hw_fast_dormancy=1
      55. ro.config.hw_power_saving=1
      56. # Misc Tweaks (enables ADB service)
      57. persist.service.adb.enable=1
      58. # Sensor Sleep Control
      59. ro.ril.sensor.sleep.control=1
      60. # Device will boot faster
      61. persist.sys.shutdown.mode=hibernate
      62. ro.config.hw_fast_dormancy=1
      63. ro.config.hw_quickpoweron=true
      64. ro.securestorage.support=false
      65. # Reduce dial-out time
      66. ro.telephony.call_ring.delay=0
      67. # Allow purge of assets to free more ram
      68. persist.sys.purgeable_assets=1
      69. # More free ram and apps load faster
      70. dalvik.vm.dexopt-flags=m=y
      71. # More RAM
      72. #persist.sys.purgeable_assets=1
      73. persist.service.pcsync.enable=0
      74. persist.service.lgospd.enable=0
      75. ro.config.low_ram.mod=true
      76. # Qualcomm Tuned
      77. debug.qctwa.statusbar=1
      78. debug.qctwa.preservebuf=1
      79. debug.qc.hardware=true
      80. com.qc.hardware=true
      81. ro.max.fling_velocity=12000
      82. ro.min.fling_velocity=8000
      83. # Increase general Performance
      84. debug.performance.tuning=1
      85. # Increase some Performance
      86. ro.secure=0
      87. persist.sys.use_16bpp_alpha=1
      88. ro.product.gpu.driver=1
      89. ro.min.fling_velocity=8000
      90. debug.gr.swapinterval=1
      91. debug.kill_allocating_task=0
      92. ENFORCE_PROCESS_LIMIT=false
      93. hw3d.force=1
      94. persist.sys.NV_FPSLIMIT=60
      95. ro.debuggable=1
      96. ro.min_pointer_dur=8
      97. ro.min_pointer_dur=1
      98. ro.wmt.blcr.enable=0
      99. # Better Telephony Settings
      100. ro.config.vc_call_vol_steps=20
      101. ring.delay=0
      102. ro.lge.proximity.delay=25
      103. mot.proximity.delay=25
      104. ro.mot.buttonlight.timeout=0
      105. # TOUCH
      106. touch.presure.scale=0.001
      107. # Better Scrolling responsiveness and speed
      108. windowsmgr.max_events_per_sec=340
      109. ro.max.fling_velocity=12000
      110. ro.min.fling_velocity=8000
      111. ro.min_pointer_dur=8
      112. # Smoothens UI
      113. persist.service.lgospd.enable=0
      114. persist.service.pcsync.enable=0
      115. ro.ril.enable.a52=1
      116. ro.ril.enable.a53=0
      117. # Increase camera's photo and video recording quality
      118. ro.media.dec.jpeg.memcap=8000000
      119. ro.media.enc.hprof.vid.bps=8000000
      120. ro.media.enc.hprof.vid.fps=65
      121. ro.media.dec.aud.wma.enabled=1
      122. ro.media.dec.vid.wmv.enabled=1
      123. # Better Flashlight intensity and camera-flash quality
      124. ro.media.capture.flash=led
      125. ro.media.capture.flashMinV=3300000
      126. ro.media.capture.torchIntensity=40
      127. ro.media.capture.flashIntensity=70
      128. ro.media.capture.maxres=16m
      129. ro.media.capture.fast.fps=4
      130. ro.media.capture.slow.fps=120
      131. ro.media.panorama.defres=3264x1840
      132. ro.media.panorama.frameres=1280x720
      133. ro.camcorder.videoModes=true
      134. ro.media.cam.preview.fps=0
      135. ro.media.codec_priority_for_thumb=so
      136. # Better call voice quality.
      137. ro.ril.enable.amr.wideband=1
      138. # Force launcher into memory
      139. ro.HOME_APP_ADJ=1
      140. # Disable Bytecode Verification
      141. dalvik.vm.verify-bytecode=false
      142. dalvik.vm.dexopt-flags=m=y,v=n,o=v
      143. dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
      144. # Improves Camera & Video Results
      145. ro.media.panorama.defres=3264x1840
      146. ro.media.panorama.frameres=1280x720
      147. ro.camcorder.videoModes=true
      148. ime_extend_row_keyboard=true
      149. ime_onehand_keyboard=true
      150. ime_split_keyboard=true
      151. ime_vibration_pattern=0:60
      152. # Hardware 2D & 3D Rendering
      153. hw3d.force=1
      154. hw2d.force=1
      155. # 3d performance
      156. persist.android.strictmode=0
      157. ro.secure=0
      158. # Audio Tweaks
      159. persist.audio.fluence.mode=endfire
      160. persist.audio.hp=true
      161. persist.audio.vr.enable=false
      162. persist.audio.handset.mic=digital
      163. persist.audio.lowlatency.rec=false
      164. # System prop to select audio resampler quality
      165. af.resampler.quality=255
      166. # System prop to select MPQAudioPlayer by default on mpq8064
      167. mpq.audio.decode=true
      168. # Increase jpg quality to 100%
      169. ro.media.enc.jpeg.quality=100
      170. # Disable Error reporting and logs
      171. profiler.force_disable_err_rpt=1
      172. profiler.force_disable_ulog=1
      173. # Disable Sending Usage Data
      174. ro.config.nocheckin=1
      175. # Fix some application issues (FC)
      176. ro.kernel.android.checkjni=0
      177. # MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
      178. ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
      179. # Miscellaneous Tweaks for performance
      180. ro.config.hw_menu_unlockscreen=false
      181. dalvik.vm.dexopt-flags=m=y
      182. ro.mot.eri.losalert.delay=1000
      183. ro.telephony.sms_segment_size=160
      184. # Better internet browsing & download speed
      185. net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
      186. net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
      187. net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
      188. net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
      189. # Smoother video streaming and tweak media
      190. media.stagefright.enable-player=true
      191. media.stagefright.enable-meta=true
      192. media.stagefright.enable-scan=true
      193. media.stagefright.enable-http=true
      194. media.stagefright.enable-aac=true
      195. media.stagefright.enable-qcp=true
      196. media.stagefright.enable-record=false
      197. # 3G signal and speed tweaks
      198. ro.ril.hsxpa=3
      199. ro.ril.gprsclass=10
      200. ro.ril.hep=1
      201. ro.ril.enable.dtm=1
      202. ro.ril.hsdpa.category=12
      203. ro.ril.enable.a53=1
      204. ro.ril.enable.3g.prefix=1
      205. ro.ril.htcmaskw1.bitmask=4294967295
      206. ro.ril.htcmaskw1=14449
      207. ro.ril.hsupa.category=7
      208. ro.ril.hsdpa.category=10
      209. ro.ril.enable.a52=1
      210. ro.ril.set.mtu1472=1
      211. persist.cust.tel.eons=1
      212. ro.config.hw_fast_dormancy=1
      213. persist.data_netmgrd_mtu=1482
      214. persist.data_netmgrd_nint=8
      215. ro.use_data_netmgrd=true
      216. ro.ril.enable.dtm=1
      217. ro.ril.def.agps.mode=2
      218. ro.ril.def.agps.feature=1
      219. ro.ril.enable.gea3=1
      220. ro.ril.enable.fd.plmn.prefix=23402,23410,23411
      221. # Modify MTU from 1500 to 1472 on 3G network for speeding up
      222. ro.ril.set.mtu1472=1
      223. # For the default value of agps
      224. ro.ril.def.agps.mode=2
      225. ro.ril.def.agps.feature=1
      226. # GOOGLE DNS
      227. net.dns1=8.8.8.8
      228. net.dns2=8.8.4.4
      229. net.rmnet0.dns1=8.8.8.8
      230. net.rmnet0.dns2=8.8.4.4
      231. net.ppp0.dns1=8.8.8.8
      232. net.ppp0.dns2=8.8.4.4
      233. net.wlan0.dns1=8.8.8.8
      234. net.wlan0.dns2=8.8.4.4
      235. net.eth0.dns1=8.8.8.8
      236. net.eth0.dns2=8.8.4.4
      237. net.gprs.dns1=8.8.8.8
      238. net.gprs.dns2=8.8.4.4
      239. # CRT
      240. persist.sys.screen_off=crt
      241. persist.sys.screen_on=none
      242. # Support For IPV4 and IPV6
      243. persist.telephony.support.ipv6=1
      244. persist.telephony.support.ipv4=1
      245. #
      246. ro.com.google.locationfeatures=1
      247. ro.com.google.networklocation=1
      248. htc.audio.alt.enable=0
      249. htc.audio.hac.enable=0
      250. # Wireless Tweaks
      251. net.ipv4.ip_no_pmtu_disc=0
      252. net.ipv4.route.flush=1
      253. net.ipv4.tcp_ecn=0
      254. net.ipv4.tcp_fack=1
      255. net.ipv4.tcp_mem=187000 187000 187000
      256. net.ipv4.tcp_moderate_rcvbuf=1
      257. net.ipv4.tcp_no_metrics_save=1
      258. net.ipv4.tcp_rfc1337=1
      259. net.ipv4.tcp_rmem=4096 39000 187000
      260. net.ipv4.tcp_sack=1
      261. net.ipv4.tcp_timestamps=1
      262. net.ipv4.tcp_window_scaling=1
      263. net.ipv4.tcp_wmem=4096 39000 18700
      264. wifi.supplicant_scan_interval=180
      265. net.ipv4.tcp_window_scaling=1
      266. # Video Acceleration Enabled And HW debugging
      267. video.accelerate.hw=1
      268. debug.sf.hw=1
      269. debug.performance.tuning=1
      270. debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
      271. debug.egl.hw=1
      272. debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
      273. # Disable logcat
      274. logcat.live=disable
      275. # Better image quality, lower performance.
      276. persist.sys.use_dithering=1
      277. # For SD storage insert notification sound
      278. persist.service.mount.playsnd=0
      279. # faster youtube?
      280. ro.ril.hep=0
      281. # Unlock fps limit
      282. debug.egl.swapinterval=0
      283. qemu.hw.mainkeys=1
      284. # Enable egl profiler - enable harware egl profile
      285. debug.egl.profiler=1
      286. # Other Tweaks
      287. qemu.hw.mainkeys=1
      288. ro.config.hw_new_wifitopdp=1
      289. vm.dirty_ratio=90
      290. vm.dirty_background_ratio=70
      291. vm.vfs_cache_pressure=10
      292. vm.min_free_kbytes=4096
      293. ro.config.hw_new_wifitopdp=1
      294. dalvik.vm.dexopt-data-only=1
      295. dalvik.vm.heapstartsize=1m
      296. dalvik.vm.heapgrowthlimit=64m
      297. dalvik.vm.lockprof.threshold=250
      298. dalvik.vm.dexopt-flags=m=v,o=y
      299. dalvik.vm.jmiopts=forcecopy
      Display All



      Lol if u see some tweaking same just deleted the same lol i hope it will helping u lol

      HAPPY NEW YEAR From thereassaad to ALL


      WOW WOW WOW!!
      My god man!!
      Thank you so much for this!!
      Please feel completely at home here and educate us as much as you feel :) :thumbup:
      THANK YOU!! :clap: :clap:

    • Re: Build.prop TWEAKS for every PHONE

      "friedrich420" wrote:

      "thereassaad" wrote:

      Hello to All this is my first thread here on ECHOE forum so this tweaks maybe its working for u & maybe not so just adding what u want from this tweaks to ur system/build.prop at the end of ur build.prop then reboot to ur custom recovery & wipe cache/dalvick then give it few hours/days & u will see the difference lol so enjoy my friends i hope its helping u lol


      Source Code

      1. # Rendering Tweaks
      2. debug.composition.type=c2d
      3. debug.egl.hw=1
      4. debug.enabletr=true
      5. debug.overlayui.enable=1
      6. debug.qctwa.preservebuf=1
      7. debug.performance.tuning=1
      8. debug.sf.hw=1
      9. dev.pm.dyn_samplingrate=1
      10. hw3d.force=1
      11. ro.config.disable.hw_accel=false
      12. ro.fb.mode=1
      13. ro.sf.compbypass.enable=0
      14. ro.vold.umsdirtyratio=20
      15. persist.sys.composition.type=c2d
      16. persist.sys.ui.hw=1
      17. video.accelerate.hw=1
      18. ro.camera.sound.forced=0
      19. # Default Network Mode
      20. ro.telephony.default_network=10
      21. # Enable GPU Acceleration
      22. video.accelerate.hw=1
      23. debug.performance.tuning=1
      24. persist.sys.composition.type=gpu
      25. debug.qc.hardware=true
      26. debug.qctwa.statusbar=1
      27. debug.egl.profiler=1
      28. debug.egl.hw=1
      29. debug.composition.type=gpu
      30. hw3d.force=1
      31. ro.product.gpu.driver=1
      32. persist.sys.use_16bpp_alpha=1
      33. persist.sampling_profiler=0
      34. hwui.render_dirty_regions=false
      35. hwui.disable_vsync=true
      36. # Saves some battery without reducing performances
      37. wifi.supplicant_scan_interval=497
      38. pm.sleep_mode=2
      39. power.saving.mode=1
      40. ro.vold.umsdirtyratio=20
      41. proximity_incall=enable
      42. ro.config.hw_quickpoweron=true
      43. usb_wakeup=enable
      44. ro.config.hw_power_saving=true
      45. # Battery save
      46. ro.ril.disable.power.collapse=0
      47. profiler.force_disable_err_rpt=1
      48. profiler.force_disable_ulog=1
      49. dalvik.vm.checkjni=false
      50. dalvik.vm.execution-mode=int:jit
      51. ro.ril.power_collapse=1
      52. power_supply.wakeup=enable
      53. ro.mot.eri.losalert.delay=1000
      54. ro.config.hw_fast_dormancy=1
      55. ro.config.hw_power_saving=1
      56. # Misc Tweaks (enables ADB service)
      57. persist.service.adb.enable=1
      58. # Sensor Sleep Control
      59. ro.ril.sensor.sleep.control=1
      60. # Device will boot faster
      61. persist.sys.shutdown.mode=hibernate
      62. ro.config.hw_fast_dormancy=1
      63. ro.config.hw_quickpoweron=true
      64. ro.securestorage.support=false
      65. # Reduce dial-out time
      66. ro.telephony.call_ring.delay=0
      67. # Allow purge of assets to free more ram
      68. persist.sys.purgeable_assets=1
      69. # More free ram and apps load faster
      70. dalvik.vm.dexopt-flags=m=y
      71. # More RAM
      72. #persist.sys.purgeable_assets=1
      73. persist.service.pcsync.enable=0
      74. persist.service.lgospd.enable=0
      75. ro.config.low_ram.mod=true
      76. # Qualcomm Tuned
      77. debug.qctwa.statusbar=1
      78. debug.qctwa.preservebuf=1
      79. debug.qc.hardware=true
      80. com.qc.hardware=true
      81. ro.max.fling_velocity=12000
      82. ro.min.fling_velocity=8000
      83. # Increase general Performance
      84. debug.performance.tuning=1
      85. # Increase some Performance
      86. ro.secure=0
      87. persist.sys.use_16bpp_alpha=1
      88. ro.product.gpu.driver=1
      89. ro.min.fling_velocity=8000
      90. debug.gr.swapinterval=1
      91. debug.kill_allocating_task=0
      92. ENFORCE_PROCESS_LIMIT=false
      93. hw3d.force=1
      94. persist.sys.NV_FPSLIMIT=60
      95. ro.debuggable=1
      96. ro.min_pointer_dur=8
      97. ro.min_pointer_dur=1
      98. ro.wmt.blcr.enable=0
      99. # Better Telephony Settings
      100. ro.config.vc_call_vol_steps=20
      101. ring.delay=0
      102. ro.lge.proximity.delay=25
      103. mot.proximity.delay=25
      104. ro.mot.buttonlight.timeout=0
      105. # TOUCH
      106. touch.presure.scale=0.001
      107. # Better Scrolling responsiveness and speed
      108. windowsmgr.max_events_per_sec=340
      109. ro.max.fling_velocity=12000
      110. ro.min.fling_velocity=8000
      111. ro.min_pointer_dur=8
      112. # Smoothens UI
      113. persist.service.lgospd.enable=0
      114. persist.service.pcsync.enable=0
      115. ro.ril.enable.a52=1
      116. ro.ril.enable.a53=0
      117. # Increase camera's photo and video recording quality
      118. ro.media.dec.jpeg.memcap=8000000
      119. ro.media.enc.hprof.vid.bps=8000000
      120. ro.media.enc.hprof.vid.fps=65
      121. ro.media.dec.aud.wma.enabled=1
      122. ro.media.dec.vid.wmv.enabled=1
      123. # Better Flashlight intensity and camera-flash quality
      124. ro.media.capture.flash=led
      125. ro.media.capture.flashMinV=3300000
      126. ro.media.capture.torchIntensity=40
      127. ro.media.capture.flashIntensity=70
      128. ro.media.capture.maxres=16m
      129. ro.media.capture.fast.fps=4
      130. ro.media.capture.slow.fps=120
      131. ro.media.panorama.defres=3264x1840
      132. ro.media.panorama.frameres=1280x720
      133. ro.camcorder.videoModes=true
      134. ro.media.cam.preview.fps=0
      135. ro.media.codec_priority_for_thumb=so
      136. # Better call voice quality.
      137. ro.ril.enable.amr.wideband=1
      138. # Force launcher into memory
      139. ro.HOME_APP_ADJ=1
      140. # Disable Bytecode Verification
      141. dalvik.vm.verify-bytecode=false
      142. dalvik.vm.dexopt-flags=m=y,v=n,o=v
      143. dalvik.vm.dexopt-flags=m=y,v=n,o=v,u=n
      144. # Improves Camera & Video Results
      145. ro.media.panorama.defres=3264x1840
      146. ro.media.panorama.frameres=1280x720
      147. ro.camcorder.videoModes=true
      148. ime_extend_row_keyboard=true
      149. ime_onehand_keyboard=true
      150. ime_split_keyboard=true
      151. ime_vibration_pattern=0:60
      152. # Hardware 2D & 3D Rendering
      153. hw3d.force=1
      154. hw2d.force=1
      155. # 3d performance
      156. persist.android.strictmode=0
      157. ro.secure=0
      158. # Audio Tweaks
      159. persist.audio.fluence.mode=endfire
      160. persist.audio.hp=true
      161. persist.audio.vr.enable=false
      162. persist.audio.handset.mic=digital
      163. persist.audio.lowlatency.rec=false
      164. # System prop to select audio resampler quality
      165. af.resampler.quality=255
      166. # System prop to select MPQAudioPlayer by default on mpq8064
      167. mpq.audio.decode=true
      168. # Increase jpg quality to 100%
      169. ro.media.enc.jpeg.quality=100
      170. # Disable Error reporting and logs
      171. profiler.force_disable_err_rpt=1
      172. profiler.force_disable_ulog=1
      173. # Disable Sending Usage Data
      174. ro.config.nocheckin=1
      175. # Fix some application issues (FC)
      176. ro.kernel.android.checkjni=0
      177. # MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds)
      178. ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000
      179. # Miscellaneous Tweaks for performance
      180. ro.config.hw_menu_unlockscreen=false
      181. dalvik.vm.dexopt-flags=m=y
      182. ro.mot.eri.losalert.delay=1000
      183. ro.telephony.sms_segment_size=160
      184. # Better internet browsing & download speed
      185. net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
      186. net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
      187. net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
      188. net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
      189. # Smoother video streaming and tweak media
      190. media.stagefright.enable-player=true
      191. media.stagefright.enable-meta=true
      192. media.stagefright.enable-scan=true
      193. media.stagefright.enable-http=true
      194. media.stagefright.enable-aac=true
      195. media.stagefright.enable-qcp=true
      196. media.stagefright.enable-record=false
      197. # 3G signal and speed tweaks
      198. ro.ril.hsxpa=3
      199. ro.ril.gprsclass=10
      200. ro.ril.hep=1
      201. ro.ril.enable.dtm=1
      202. ro.ril.hsdpa.category=12
      203. ro.ril.enable.a53=1
      204. ro.ril.enable.3g.prefix=1
      205. ro.ril.htcmaskw1.bitmask=4294967295
      206. ro.ril.htcmaskw1=14449
      207. ro.ril.hsupa.category=7
      208. ro.ril.hsdpa.category=10
      209. ro.ril.enable.a52=1
      210. ro.ril.set.mtu1472=1
      211. persist.cust.tel.eons=1
      212. ro.config.hw_fast_dormancy=1
      213. persist.data_netmgrd_mtu=1482
      214. persist.data_netmgrd_nint=8
      215. ro.use_data_netmgrd=true
      216. ro.ril.enable.dtm=1
      217. ro.ril.def.agps.mode=2
      218. ro.ril.def.agps.feature=1
      219. ro.ril.enable.gea3=1
      220. ro.ril.enable.fd.plmn.prefix=23402,23410,23411
      221. # Modify MTU from 1500 to 1472 on 3G network for speeding up
      222. ro.ril.set.mtu1472=1
      223. # For the default value of agps
      224. ro.ril.def.agps.mode=2
      225. ro.ril.def.agps.feature=1
      226. # GOOGLE DNS
      227. net.dns1=8.8.8.8
      228. net.dns2=8.8.4.4
      229. net.rmnet0.dns1=8.8.8.8
      230. net.rmnet0.dns2=8.8.4.4
      231. net.ppp0.dns1=8.8.8.8
      232. net.ppp0.dns2=8.8.4.4
      233. net.wlan0.dns1=8.8.8.8
      234. net.wlan0.dns2=8.8.4.4
      235. net.eth0.dns1=8.8.8.8
      236. net.eth0.dns2=8.8.4.4
      237. net.gprs.dns1=8.8.8.8
      238. net.gprs.dns2=8.8.4.4
      239. # CRT
      240. persist.sys.screen_off=crt
      241. persist.sys.screen_on=none
      242. # Support For IPV4 and IPV6
      243. persist.telephony.support.ipv6=1
      244. persist.telephony.support.ipv4=1
      245. #
      246. ro.com.google.locationfeatures=1
      247. ro.com.google.networklocation=1
      248. htc.audio.alt.enable=0
      249. htc.audio.hac.enable=0
      250. # Wireless Tweaks
      251. net.ipv4.ip_no_pmtu_disc=0
      252. net.ipv4.route.flush=1
      253. net.ipv4.tcp_ecn=0
      254. net.ipv4.tcp_fack=1
      255. net.ipv4.tcp_mem=187000 187000 187000
      256. net.ipv4.tcp_moderate_rcvbuf=1
      257. net.ipv4.tcp_no_metrics_save=1
      258. net.ipv4.tcp_rfc1337=1
      259. net.ipv4.tcp_rmem=4096 39000 187000
      260. net.ipv4.tcp_sack=1
      261. net.ipv4.tcp_timestamps=1
      262. net.ipv4.tcp_window_scaling=1
      263. net.ipv4.tcp_wmem=4096 39000 18700
      264. wifi.supplicant_scan_interval=180
      265. net.ipv4.tcp_window_scaling=1
      266. # Video Acceleration Enabled And HW debugging
      267. video.accelerate.hw=1
      268. debug.sf.hw=1
      269. debug.performance.tuning=1
      270. debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
      271. debug.egl.hw=1
      272. debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing
      273. # Disable logcat
      274. logcat.live=disable
      275. # Better image quality, lower performance.
      276. persist.sys.use_dithering=1
      277. # For SD storage insert notification sound
      278. persist.service.mount.playsnd=0
      279. # faster youtube?
      280. ro.ril.hep=0
      281. # Unlock fps limit
      282. debug.egl.swapinterval=0
      283. qemu.hw.mainkeys=1
      284. # Enable egl profiler - enable harware egl profile
      285. debug.egl.profiler=1
      286. # Other Tweaks
      287. qemu.hw.mainkeys=1
      288. ro.config.hw_new_wifitopdp=1
      289. vm.dirty_ratio=90
      290. vm.dirty_background_ratio=70
      291. vm.vfs_cache_pressure=10
      292. vm.min_free_kbytes=4096
      293. ro.config.hw_new_wifitopdp=1
      294. dalvik.vm.dexopt-data-only=1
      295. dalvik.vm.heapstartsize=1m
      296. dalvik.vm.heapgrowthlimit=64m
      297. dalvik.vm.lockprof.threshold=250
      298. dalvik.vm.dexopt-flags=m=v,o=y
      299. dalvik.vm.jmiopts=forcecopy
      Display All



      Lol if u see some tweaking same just deleted the same lol i hope it will helping u lol

      HAPPY NEW YEAR From thereassaad to ALL


      WOW WOW WOW!!
      My god man!!
      Thank you so much for this!!
      Please feel completely at home here and educate us as much as you feel :) :thumbup:
      THANK YOU!! :clap: :clap:


      Thanks my friends & sure i will do lol i hope this its helping u lol

      HAPPY NEW YEAR From thereassaad to ALL
    • Re: Build.prop TWEAKS for every PHONE

      "satshow" wrote:

      Can we add this safe and how to install?


      you can add them a the end of your build.prop
      Just copy-paste them
      Make a backup just in case even though worst case scenario is that some of them may not make a difference but not cause a bootloop..

    • Re: Build.prop TWEAKS for every PHONE

      "satshow" wrote:

      Can we add this safe and how to install?


      This its adding by copy/paste to ur end build.prop & just in case make backup for ur old build.prop as flashable zip then play with this tweaks lol

      HAPPY NEW YEAR From thereassaad to ALL
    • Re: Build.prop TWEAKS for every PHONE

      "thereassaad" wrote:

      "satshow" wrote:

      Can we add this safe and how to install?


      This its adding by copy/paste to ur end build.prop & just in case make backup for ur old build.prop as flashable zip then play with this tweaks lol

      HAPPY NEW YEAR From thereassaad to ALL


      i beat you this time lol :D

    • Re: Build.prop TWEAKS for every PHONE

      "friedrich420" wrote:

      "thereassaad" wrote:

      "satshow" wrote:

      Can we add this safe and how to install?


      This its adding by copy/paste to ur end build.prop & just in case make backup for ur old build.prop as flashable zip then play with this tweaks lol

      HAPPY NEW YEAR From thereassaad to ALL


      i beat you this time lol :D


      Lol

      HAPPY NEW YEAR From thereassaad to ALL
    • Re: Build.prop TWEAKS for every PHONE

      "thereassaad" wrote:

      Hello to All this is my first thread here on ECHOE forum so this tweaks maybe its working for u & maybe not so just adding what u want from this tweaks to ur system/build.prop at the end of ur build.prop then reboot to ur custom recovery & wipe cache/dalvick then give it few hours/days & u will see the difference lol so enjoy my friends i hope its helping u lol


      Thanks a lot for your post! A lot of the tweaks are useful in that code.

      However I wouldn't just copy paste this into any device though - some tweaks in the list are very outdated and/or hardware-specific.

      Examples:

      persist.sys.NV_FPSLIMIT=60 ---- only for Nvidia GPUs

      ro.media.enc.hprof.vid.bps=8000000 ---- modern devices with fullhd video capture require much more than 8 Mbps bitrate, so this is rather a downgrade

      ro.media.dec.jpeg.memcap=8000000 ---- same thing, capping memory for decoding progressive jpegs to a low value as of modern standards

      windowsmgr.max_events_per_sec=340 ---- this can be outright bad because this value must be at (max system FPS) x 1.5 = 90, which is already the default value. Setting this higher may cause frame drops sometimes and generally is bad for the battery

      debug.performance.tuning=1 ---- useless, not used anywhere except some CM builds

      dalvik.vm.checkjni=false ---- it is false by default in Android

      pm.sleep_mode=2 ---- useless in build.prop, this parameter can only be set by kernel

      ro.config.hw_fast_dormancy=1 ---- depending on the device, carrier, usage pattern, type of network (4G/3G/2G), this can save your battery or can drain your battery. If it even does anything in build.prop.

      profiler.force_disable_ulog=1 ---- HTC-specific

      profiler.force_disable_err_rpt=1 ---- HTC-specific

      ro.HOME_APP_ADJ=1 ---- useless since ICS (!)


      Bottom line: some of the tweaks are pretty good, others are useless, some were useful 6 years ago and some may have a negative impact on your device, including performance, battery and quality. It looks to me that this list was created by the principles of "let's take all tweaks ever mentioned and stick them all into one file, more is better right?" - well, in this case it's not.

      Cheers :)
      S7E G935FD | Echoe v12 | Ael 4.5